Ad Code

Responsive Advertisement

Ticker

6/recent/ticker-posts

2Wire 5012NV Router Default Password & Login, Setting, And Reset

2Wire 5012NV Router Default Password & Login

Here you will find the standard IP address and predefined access data for the 2Wire 5012NV Router Default Password & Login firewall router user interface. At the bottom of this website, there are manuals that explain how to access the user interface of this router and how to perform a factory reset.

Default Login:
Username – admin
Password - password
IP Address - 192.168.1.1

Default IP Address for 2Wire 5012NV
192.168.1.1
192.168.2.1
192.168.0.1

2Wire 5012NV Router Specifications (specs) - 2Wire 5012NV Router Default Password & Login

System specs

CPU: 800 MHz RAM: 256 MiB Flash: 128 MiB Custom firmware: Openwrt

Connectivity

WiFi: Gigabit (abgn+ac) WiFi bands: 2.4GHz & 5GHz WiFi throughput: 1450 Mbps WAN: 1 x Gigabit ports ETH: 4 x Gigabit ports USB-ports: 0

Default factory settings for 2Wire 5012NV Router - 2Wire 5012NV Router Default Password & Login

If you have performed a reset of your 2Wire 5012NV device or not changed the defaults, you should be able to access it with the following

Default Network name (SSID): 2Wire 5012NV Router Default Gateway IP: 192.168.1.1 Default username: admin Default password: password Default subnet mask: 255.255.255.0 Default DNS server: 192.168.1.1

How to login to the 2Wire 5012NV Router

To login to the 2Wire 5012NV router and change the settings, you can follow these steps:

  1. Make sure you are connected to the router's network, either by Wi-Fi or Ethernet cable. 
  2. Open your browser and visit http://192.168.1.1 
  3. You should be prompted with a login dialogue.
  4. Enter the username: admin and the password. 
  5. You will now be logged in. If you haven't yet changed the default password, we recommend that you change it the first thing you do after logging in.

Hard reset instructions for 2Wire 5012NV Router

If your 2Wire 5012NV router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist.

Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore. You can reset your 2Wire 5012NV in the following way(s):

  1. with the reset button
  2. The 30-30-30 reset
  3. When the router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)
  4. While holding the reset button pressed unplugs the power of the router and holds the reset button for 30 seconds
  5. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.

Contact Support

If you experience problems when entering the 2Wire 5012NV router, then you might use the wrong username or password. Don't forget to save login details after you reset.

Forgot the login password? Try the hard reset function. To do this, press and hold the small black button normally located behind the case of your router for approximately 10 seconds. Do it will reset your router to factory settings.

The router login page does not load? If for some reason, the Admin web page fails to load and then check whether the device you are using is connected to Wi-Fi. You can also search what the IP address set is specified as the default for the router.

In many cases, the problem associated with loading the router login screen related to it has a different IP from trying to load. In this case, your network of course uses a different IP address. If it's the problem, review the router list of our IP addresses, and find the right address. If you need help, see our tutorial on how to find your router's IP address.

Post a Comment

0 Comments